Nissan Qashqai e-POWER 2023 Owners Manual
5.3.4.7. [Tyre Pressures]
The settings in the [Tyre Pressures] menu are all related to the Tyre Pressure Monitoring System TPMS (see
.).[Target Front]
[Target Rear]
[Tyre Pressure Unit]
[Calibrate]
[Target Front]
The [Target Front] tyre pressure is the pressure specified for the front tyres on the tyre placard (see
and .).Use the scroll dial to select and change the value for the [Target Front] tyre pressure.
[Target Rear]
The [Target Rear] tyre pressure is the pressure specified for the rear tyres on the tyre placard (see
and .).Use the scroll dial to select and change the value for the [Target Rear] tyre pressure.
[Tyre Pressure Unit]
The unit for tyre pressure that displays in the Vehicle Information Display can be changed to:
[psi]
[bar]
[kPa]
[kgf/cm²]
Use the scroll dial to select and change the unit.
Pressure units conversion table
kPa | psi | bar | kgf/cm${1} |
200 | 29 | 2.0 | 2.0 |
210 | 30 | 2.1 | 2.1 |
220 | 32 | 2.2 | 2.2 |
230 | 33 | 2.3 | 2.3 |
240 | 35 | 2.4 | 2.4 |
250 | 36 | 2.5 | 2.5 |
250 | 36 | 2.5 | 2.5 |
260 | 38 | 2.6 | 2.6 |
270 | 39 | 2.7 | 2.7 |
280 | 41 | 2.8 | 2.8 |
290 | 42 | 2.9 | 2.9 |
300 | 44 | 3.0 | 3.0 |
310 | 45 | 3.1 | 3.1 |
320 | 46 | 3.2 | 3.2 |
330 | 48 | 3.3 | 3.3 |
340 | 49 | 3.4 | 3.4 |
[Calibrate]
The tyre pressure is affected by the temperature of the tyre; the tyre temperature increases when the vehicle is driven. The TPMS system uses temperature sensors in the tyres to compensate for changes in temperature in order to prevent false TPMS warnings.
The [Calibrate] function resets the previously stored temperature value. It is recommended that this function is performed after the tyre pressures are adjusted.
Use the scroll dial to start or cancel the calibration process. While the calibration process is active, the message: [Calibrate] will be displayed.