Nissan Qashqai e-POWER 2023 Owners Manual

5.3.4.9. [Vehicle Settings]

The vehicle settings allows user to change settings for the following menus.

  • [Power Back Door] (where fitted)

  • [Lighting]

  • [Locking]

  • [Wipers]

  • [Alarm System] (where fitted)

  • [Driving Position] (where fitted)

  • [Rear Door Alert]

  • [Mirror Fold]

The vehicle settings can be changed using the scroll dial.

[Power Back Door] (where fitted)

This allows user to turn the power tailgate ON or OFF.

When [Power Back Door] is turned off, the power tailgate can still be opened and closed by pressing the open button and moving the tailgate by hand. Note that the effort required to open/close the power tailgate will be higher than for a non-power tailgate model.

[Lighting]

The [Lighting] menu has the following options:

  • [Welcome Light]

    The welcome lighting causes the lights to be turned on when the doors are unlocked using the Intelligent Key. Use the scroll dial to turn this feature ON or OFF.

  • [Mood Lighting] (where fitted)

    The brightness of the [Mood Lighting] can be adjusted. Use the scroll dial to select the brightness.

[Locking]

The [Locking] menu has the following options:

  • [I-Key Door Lock] (where fitted)

    When this item is turned on, the request switch on the door is activated. Use the scroll dial to activate or deactivate this function.

  • [Selective Unlock] (where fitted)

    When this item is turned on, and the driver's side door handle request switch is pushed, only the driver's side door is unlocked. All the doors can be unlocked if the door handle request switch is pushed again within 1 minute. When this item is turned to off, all the doors will be unlocked when the door handle request switch is pushed once. Use the scroll dial to activate or deactivate this function.

  • [Auto Door Unlock] (where fitted)

    The [Auto Door Unlock] feature allows user to customise the auto door unlock options. Use the scroll dial to change the mode.

    • [Shift to Park]

    • [Ignition OFF]

    • [OFF]

  • [Horn Beeps on Lock] (where fitted)

    When this item is turned on, the horn will beep and the hazard indicators will flash twice when locking the vehicle with the Intelligent Key. Use the scroll dial to activate or deactivate this function.

  • [Auto Door Lock] (where fitted)

    The [Auto Door Lock] feature allows user to customise the auto door lock options. Use the scroll dial to change the mode.

  • [Vehicle Speed] (where fitted)

  • [Shift out of Park] (where fitted)

  • [OFF]

[Wipers]

The [Wipers] menu has the following options:

  • [Speed Dependent]

    The [Speed Dependent] feature can be activated or deactivated. Use the scroll dial to turn this feature ON or OFF.

  • [Auto Wipe]

    The [Auto Wipe] wiper feature can be set to be ON or OFF. Use the scroll dial to turn this feature ON or OFF.

  • [Reverse Link] (where fitted)

    The Reverse Link wiper feature can be set to be ON or OFF. From the [Wipers] menu, select [Reverse Link]. Use the scroll dial to turn this feature ON or OFF. If set to ON, the rear wiper will operate if the front wipers are switched on and the shift position is in the R (Reverse) position.

  • [Drip Wipe]

    The [Drip Wipe] feature can be set to be ON or OFF. From the [Wipers] menu, select [Drip Wipe]. Use the Scroll dial to turn this feature ON or OFF. If set to ON, the wiper will operate once about 3 seconds after using the washer. This operation is to wipe washer fluid that has dripped on the windscreen.

[Alarm System] (where fitted)

The [Alarm System] menu has the following options:

  • [Always ON]

  • [Ask on Exit]

    When this option (where fitted) is selected, the alarm system will provide the choice to disable the interior movement sensors (where fitted) after the e-POWER system is switched OFF. Use the scroll dial to select the preferred function.

  • [Disable Once]

    When this option (where fitted) is selected, the interior movement sensors (where fitted) will be disabled until the next time the alarm system is disarmed.

[Driving Position] (where fitted)

[Rear Door Alert] (where fitted)

The [Rear Door Alert] feature allows user to customise the Rear Door Alert options. Use the scroll dial to change the mode.

  • [Horn & Alert]

    When selected, the alert is displayed and the horn sounds.

  • [Alert Only]

    When selected, only the alert is displayed.

  • [OFF]

    When selected, no alert or horn will be active.

[Mirror Fold]

There are three options (where fitted) in the [Mirror Fold] menu:

  • [Auto Fold Off] (where fitted)

    When this item is turned on, the auto fold feature for the outside rear-view mirrors is disabled. Use the scroll dial to select this function.

  • [Unfold at Power on] (where fitted)

    When this item is turned on, the outside rear-view mirrors automatically fold when the power switch is switched OFF, and unfold when the power switch is switched ON. Use the scroll dial to select this function.

  • [Unfold at Unlock] (where fitted)

    When this item is turned on, the outside rear-view mirrors automatically fold when the vehicle doors are locked, and unfold when the vehicles doors are unlocked. Use the scroll dial to select this function.

Parent topic: