Nissan X-Trail 2024 Owners Manual
7.17.1.1. Setting speed limit
Push down the <CANCEL> switch to <SET->.
When the vehicle is stopped, the speed will be set at 30 km/h or 20 MPH.
While driving, the speed limit will be set at the current speed.
If you push up the <CANCEL> switch to <RES+> and release it when there is no vehicle set speed, the vehicle will behave the same way as when the <CANCEL> switch is pushed down to <SET->.
When the speed limit is set, the speed limiter indicator and the set speed indicator illuminate on the vehicle information display ([+/- Change Set Speed] message appears on the display).
Changing set speed limit
Use either of the following operations to change the speed limit.
Push and hold the <CANCEL> switch to <RES+> or <SET->. The set speed will increase or decrease by approximately 5 km/h or 5 MPH.
Push, then quickly release the <CANCEL> switch to <RES+> or <SET->. Each time you do this, the set speed will increase or decrease by approximately 1 km/h or 1 MPH.
The new set speed limit value will be displayed in the vehicle information display.
When the actual vehicle speed exceeds the set speed, an audible warning will be heard a short time after the set speed is exceeded if driver intervention is not detected.