7.9.2.1. Audio main operation

The audio system operates when the power switch is placed in the ON or ACC position.

Power ON/OFF

To turn on the audio system, push the Power/VOL dial.

The system will turn on in the mode, which was used immediately before the system was turned off.

To turn off the audio system, push the Power/VOL dial.

Volume control

To control the volume, turn the Power/VOL dial.

Turn the Power/VOL dial clockwise to make the sound louder.

Turn the Power/VOL dial anticlockwise to make the sound quieter.

Push to return to the previous screen.

To configure [Audio], [Clock], [Radio] or [Language] settings, perform the following procedure:

After making the setting adjustments, push the Back button repeatedly or push the <SETTING> button.

Push the <SETTING> button to display the setup menu screen. Turn the OK/MENU dial to highlight the <Audio> key and then push the OK/MENU dial.

The mode can be changed as follows by turning the OK/MENU dial:

[Sound] ⇔ [Speed Vol.] ⇔ [Bass Boost] ⇔ [Audio Reset]

Push the OK/MENU dial to select the highlighted menu.

Turn the OK/MENU dial clockwise or anticlockwise to adjust the following items and push the OK/MENU dial to confirm.

Sound menu

Bass:

Use this control to enhance or attenuate bass response sound.

Treble:

Use this control to enhance or attenuate the treble.

Bal.:

Use this control to adjust the balance of the volume between the left and right speakers.

Fade:

Use this control to adjust the balance of the volume between the front and the rear speakers.

Speed Vol. menu

This mode controls the volume output from the speakers automatically in relation to vehicle speed.

Adjusting the setting to OFF turns off the speed volume feature.

Bass Boost menu

Turn on or off the Bass Boost feature which emphasizes the lower audio frequencies.

Push the <SETTING> button to display the setup menu screen. Turn the OK/MENU dial to highlight the <Clock> key and then push the OK/MENU dial.

Turn the OK/MENU dial, and the mode will change as follows:

[Set Time] ⇔ [ON/OFF] ⇔ [Format]

Set Time

Select <Set Time> then adjust the clock as follows:

The hour display will start flashing. Turn the OK/MENU dial to adjust the hour and push the OK/MENU dial. The minute display will start flashing. Turn the OK/MENU dial to adjust the minute and push the OK/MENU dial to finish the clock adjustment.

ON/OFF

The clock display setting can be turned on and off. When the setting is turned on, the clock will be displayed. (The clock will keep being displayed even after the power of the audio unit is turned off.) When the setting is turned off, the clock will not be displayed.

Format

Switch the clock display between 24-hour clock mode and 12-hour clock mode.

The clock may also be set in the vehicle information display. See

Push the <SETTING> button to display the setup menu screen. Turn the OK/MENU dial to highlight the <Radio> key and then push the OK/MENU dial. Use the OK/MENU dial to select a mode.

TA

Use this control to switch Traffic Announcements on or off when the unit starts.

Turn the OK/MENU dial clockwise or anticlockwise to select then push the OK/MENU dial to confirm.

DAB Interrupt (where fitted)

Switch on or off specific listed Digital Interruptions. When selected the Digital Audio Broadcasting (DAB) radio stations will be interrupted if a specific message is available.

Turn the OK/MENU dial clockwise or anticlockwise to adjust then push the OK/MENU dial to select.

Ref. DAB List (where fitted)

Select this mode to manually update the DAB station list.

Press the OK/MENU dial to start the search of the stations. A confirmation message appears. In a short period of time the stations are updated and the last station (if possible) starts playing.

Ref. FM list

Select this mode to refresh the FM station list.

EPG (where fitted)

Electronic Programme Guide (EPG) for DAB is designed to offer similar features for the user as television EPG, but for radio and associated data services, for example:

Intellitext (where fitted)

Intellitext messages are a special format of DL (Dynamic Label) messages that provide data like sport or news.

Push the <SETTING> button to display the setup menu screen. Turn the OK/MENU dial to highlight the <Language> key and then push the OK/MENU dial.

Select the appropriate language and push the OK/MENU dial. Upon completion, the screen will automatically adapt the language setting.

Push the Day/Night button to switch the display brightness between the daytime and nighttime modes.

The buttons on the audio unit will also illuminate in the nighttime mode.

Push the <MEDIA> button to play a compatible device when it is connected.

Each time the <MEDIA> button is pushed, the audio source will change as follows:

[USB/iPod] → [BT Audio] → [USB/iPod]

The source that are not available will be skipped.

See