Nissan X-Trail e-POWER 2023 Owners Manual
7.9.1.3. Bluetooth® audio player
Wireless LAN (Wi-Fi) and the Bluetooth® functions share the same frequency band (2.4 GHz). Using the Bluetooth® and the wireless LAN functions at the same time may slow down or disconnect communication and cause undesired noise. It is recommended that you turn off the wireless LAN (Wi-Fi) when using the Bluetooth® functions.
Some Bluetooth® audio devices may not be used with this system. For detailed information about Bluetooth® audio devices that are available for use with this system, contact a NISSAN dealer or qualified workshop.
Before using a Bluetooth® audio system, the initial registration process for the audio device is necessary.
Operation of the Bluetooth® audio system may vary depending on the audio device that is connected. Confirm the operation procedure before use.
The playback of Bluetooth® audio will be paused under the following conditions. The playback will be resumed after the following conditions are completed.
while using a hands-free phone
while checking a connection with a mobile phone
The in-vehicle antenna for Bluetooth® communication is built in the system. Do not place the Bluetooth® audio device in an area surrounded by metal, far away from the system or in a narrow space where the device closely contacts the body or the seat. Otherwise, sound degradation or connection interference may occur.
While a Bluetooth® audio device is connected through the Bluetooth® wireless connection, the battery power of the device may discharge quicker than usual.
This system is compatible with the Bluetooth® AV profile (A2DP and AVRCP).
| Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and licensed to Visteon Corporation. |
