Nissan X-Trail e-POWER 2023 Owners Manual
8.21.8.6. CRUISE Navi Link - a feature of ProPILOT Assist with Navi-link (where fitted)
Listed below are the system limitations for the CRUISE Navi Link. Failure to operate the vehicle in accordance with these system limitations could result in serious injury or death:
There are limitations to the CRUISE Navi Link system capability. The system does not function in all driving, traffic, weather and road conditions. It is the driver’s responsibility to stay alert, drive safely, and be in control of the vehicle at all times.
The CRUISE Navi Link system does not brake the vehicle to a stop. Whenever necessary, the driver must apply appropriate braking.
It is the driver’s responsibility to select the proper speed, follow all traffic regulations and observe other road users.
The availability of the CRUISE Navi Link system is country-dependent. In some countries, for example, Iceland, Malta, Cyprus, this function is not available. The map data quality does not satisfy the system requirements. If the system detects that the vehicle is located in these countries on the basis of GPS information, the system prohibits activation of the CRUISE Navi Link function.
The CRUISE Navi Link may not operate properly in some road and traffic conditions, the system may unexpectedly change the speed. The driver must manually control the vehicle speed.
Below are some examples:
When driving in countries or areas not covered by the navigation system.
When the data from the navigation system is not up-to-date or is unavailable.
When not driving along the route suggested by the navigation system.
When the navigation system is recalculating the route.
When driving in countries or areas not covered by the navigation system.
When driving on a road under construction or newly constructed road.
When driving near a road split or junction.
When driving in bad weather or poor road conditions.
When the ProPILOT Assist with Navi-link is active on a limited access freeway (as identified in the navigation map data), the CRUISE Navi Link uses road information provided by the navigation system and can adjust the vehicle speed depending on curves, junctions and exits.
The CRUISE Navi Link uses road information provided by the navigation system and can adjust the vehicle speed depending on roundabouts (as identified in the navigation map data).
The system may not always reduce speed for all curves, junctions, roundabouts or exits and the driver may need to apply additional braking at any time.
When the vehicle is through the curve, roundabout or junction, the vehicle will accelerate again to the set speed. When exiting the limited access freeway, the driver will need to apply braking at the end of the exit.
The system does not operate when the accelerator pedal is depressed.
The system may not operate depending on the set distance to the vehicle ahead and vehicles detected ahead.
System display and indicators
Road information indicator
Appears when the system adjusts the speed depending on turns or exits.
 | Curves and junctions | |
 | Right exits | |
 | Left exits | |
 | Roundabouts | |
How to activate or deactivate the system
Push the
button on the steering wheel until [Settings] appears in the vehicle information display, and push the scroll dial.Use the scroll dial to select [Driver Assistance]. Then push the scroll dial.
Select [CRUISE Navi Link] and push the scroll dial to turn the system on or off.
The system will retain current settings in the vehicle information display even if the e–POWER system is restarted.