Nissan X-Trail e-POWER 2023 Owners Manual
4.1.1.4. Heated seats (where fitted)
Do not use or allow occupants to use the seat heater if you or the occupants cannot monitor elevated seat temperatures or have an inability to feel pain in body parts that contact the seat. Use of the seat heater by such people could result in serious injury.
The 12-volt battery could run down if the seat heater is operated while the e-POWER system is not running.
Do not use the seat heater for extended periods or when no one is using the seat.
Do not put anything on the seat which insulates heat, such as a blanket, cushion, seat cover, etc. Otherwise, the seat may become overheated.
Do not place anything hard or heavy on the seat or pierce it with a pin or similar object. This may result in damage to the heater.
Any liquid spilled on the heated seat should be removed immediately with a dry cloth.
When cleaning the seat, never use petrol, thinner, or any similar materials.
If any malfunctions are found or the heated seat does not operate properly, turn the switch off and have the system checked by a NISSAN dealer or qualified workshop.
The front seats are warmed by built-in heaters. The switches are located on the instrument panel and can be operated independently of each other.
Operation with switch
Start the e-POWER system.
Push the heated seat switch and select the desired heat range.
For high heat, push the switch once.
For medium heat, push the switch twice.
For low heat, push the switch three times.
The indicator light (1) on the switch will illuminate depending on the heat level when the heater is on.
To turn off the heater, push the heated seat switch until the indicator light turns off.
The heater is controlled by a control module, automatically adjusting the heat level to maintain comfort according to the selected heat range.
The indicator light will remain on as long as the switch is on.
When the vehicle's interior is warmed, or before you leave the vehicle, be sure to turn off the seat heater.