Nissan X-Trail e-POWER 2023 Owners Manual
8.20.2.6. How to change the set vehicle speed
To cancel the preset speed, use any of these methods:
Push the <CANCEL> switch. The set vehicle speed indicator and the cruise indicator will turn grey.
Tap the brake pedal. The set vehicle speed indicator and the cruise indicator will turn grey.
Turn the Cruise ON/OFF switch off. The ICC indicators will go out.
To reset at a faster cruising speed, use one of the following methods:
Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the <SET-> switch.
Push and hold the <RES+> switch. The set vehicle speed will increase in increments of 10 km/h or 5 MPH.
Push, then quickly release the <RES+> switch. Each time you do this, the set speed will increase by approximately 1 km/h (1 MPH).
To reset at a slower cruising speed, use one of the following methods:
Lightly tap the brake pedal. When the vehicle attains the desired speed, push the <SET-> switch and release it.
Push and hold the <SET-> switch. The set vehicle speed will decrease in increments of 10 km/h or 5 MPH.
Push, then quickly release the <SET-> switch. Each time you do this, the set speed will decrease by approximately 1 km/h (1 MPH).
To resume the preset speed, push and release the <RES+> switch. The vehicle will resume the last set cruising speed when the vehicle speed is over 30km/h (20 MPH).