Nissan X-Trail e-POWER 2023 Owners Manual
8.21.8.10. ICC sensor maintenance
The radar sensor is located on the front of the vehicle.
To keep the ICC system operating properly, be sure to observe the following:
Always keep the sensor area clean.
Do not strike or damage the areas around the sensor.
Do not attach a sticker (including transparent material) or install an accessory near the sensor. This could cause failure or malfunction.
Do not attach metallic objects near the sensor area (brush guard, etc.). This could cause failure or malfunction.
Do not alter, remove, or paint the front bumper.
Before customising or restoring the front bumper, it is recommended that you visit a NISSAN dealer or qualified workshop.
For the radio approval numbers and information, see
.The camera sensor is located above the inside rearview mirror.
To keep the proper operation of the systems and prevent a system malfunction, be sure to observe the following:
Always keep the windscreen clean.
Do not attach a sticker (including transparent material) or install an accessory near the camera unit.
Do not place reflective materials, such as white paper or a mirror, on the instrument panel. The reflection of sunlight may adversely affect the camera unit’s capability of detecting the lane markers.
Do not strike or damage the areas around the camera unit. Do not touch the camera lens or remove the screw located on the camera unit.
If the camera unit is damaged due to an accident, it is recommended that you visit a NISSAN dealer or qualified workshop.
For additional information, see
.