Nissan X-Trail e-POWER 2023 Owners Manual
11.19.3. Legal requirement to adjust headlight beam
When the vehicle is driven in a country where the driving lane is different to your home country, affix an opaque sticker on the headlight.
Place the power switch in the “OFF” position and wait until the headlights cool down.
Prepare the stickers referring to the figure. Make the stickers (A) that will be affixed to the surface of the right side headlight and the left side headlight.
Use an opaque material that prevents the light from passing through it.
Note that other transparent materials do not work effectively.
Affix the sticker by aligning the corner (B) of the sticker with the position of the mark (C) that is located on the surface of the headlight seen from front.
Affix the sticker as illustrated by aligning the mark (C) with dividing lines (D) and (E).
Align the mark (C) with the centre mark
of the LED headlight.