Nissan X-Trail e-POWER 2023 Owners Manual
5.5.5.9. Maintenance
The maintenance mode allows user to check the distance to oil change or set alerts for the reminding of maintenance intervals. To change an item:
Select “Maintenance” using the scroll dial (1) and push it.
[Service]
[Air Filter]
[Tyre]
[Other]
[Service]
The Service (Oil Control System) informs the distance to oil change. Never exceed one year or 15,000 km (9,000 miles) (except for Ukraine) or 10,000 km (6,250 miles) (for Ukraine) between oil change intervals.
Display when power is ON | Display timing | Action Required |
Engine Oil Service due in xxx km (miles) | Remaining oil life is less than 1,500 km (940 miles), 1,000 km (625 miles), 500 km (312.5 miles), 400 km (250 miles), 300 km (187.5 miles), 200 km (125 miles), 100 km (62.5 miles). | Plan to have your vehicle serviced. |
Engine Oil Service due | Remaining oil life is 0 km (0 miles). | Have your vehicle serviced within two weeks or less than 800 km (500 miles). |
The oil change interval cannot be adjusted manually.
The distance to oil change interval is calculated depending on the driving conditions and set automatically by the oil control system. A reminder will be displayed when approaching the end of the service interval.
When the Factory Reset option is selected in the vehicle information display, the oil control system will also be reset to initial value. Please change the engine oil when Factory Reset is selected.
If the oil replacement indicator is displayed, change the engine oil within two weeks or less than 800 km (500 miles).
Operating the vehicle with deteriorated oil can damage the engine.
To reset oil control system:
Place the power switch in the ON position.
Push the
and 
buttons on the steering wheel until [Settings] appears in the vehicle information display. Use the scroll dial (1) to select [Maintenance]. Then, push the scroll dial (1).Select the [Service] and push the scroll dial (1).
Push the scroll dial (1) according to the reset instructions displayed at the bottom of the [Service] maintenance screen.
When the user sets an alert for changing the engine oil in an other menu, reset both [Service] and the menu after changing the engine oil.
[Air Filter]
This indicator appears when user set distance comes for changing the air filter. You can set or reset the distance for checking or replacing these items. For scheduled maintenance items and intervals, see a separate maintenance booklet.
[Tyre]
This indicator appears when the user set distance comes for replacing tyres. You can set or reset the distance for replacing tyres.
The tyre replacement indicator is not a substitute for regular tyre checks, including tyre pressure checks. (See
.) Many factors including tyre inflation, alignment, driving habits and road conditions affect tyre wear and when tyres should be replaced. Setting the tyre replacement indicator for a certain driving distance does not mean your tyres will last that long. Use the tyre replacement indicator as a guide only and always perform regular tyre checks. Failure to perform regular tyre checks, including tyre pressure checks could result in tyre failure. Serious vehicle damage could occur and may lead to a collision, which could result in serious personal injury or death.[Other]
This indicator appears when the user set distance comes for checking or replacing maintenance items other than the engine oil, air filter and tyres. Other maintenance items can include such a thing as tyre rotation. You can set or reset the distance for checking or replacing the items.