Nissan X-Trail e-POWER 2023 Owners Manual
7.8.3.2. Manual operation
Fan speed control
Push the 
buttons to manually control the fan speed.
Air intake control
The air intake control mode will change each time the 
button is pushed.
When the indicator light is turned on, the air recirculates inside the vehicle.
When the indicator light is turned off, the air flow is drawn from outside the vehicle.
To switch to automatic control mode, push and hold the
button for about 2 seconds. The indicator light will blink, and then the air intake will be controlled automatically.
Air flow control
Push one of the air flow control buttons to select the air flow outlets.
| Air flows mainly from centre and side vents. |
| Air flows mainly from the foot outlet and partly from the defogger. |
| Air flows mainly from the defogger. |
—
—
—Synchronize temperature settings
Push the <SYNC> button to turn on the <SYNC> mode. (The indicator light on the button will turn on.)
When the <SYNC> mode is active, the driver’s side temperature control dial will control the driver's side, front passenger's side and rear temperatures.
When the passenger's side temperature control dial or the rear temperature control buttons are operated, it will cancel the <SYNC> mode of the individual zone. (The indicator light on the <SYNC> button will remain on.)
Operating both the passenger's side temperature control dial and the rear temperature control buttons will turn off the <SYNC> mode. (The indicator light on the SYNC button will turn off.) (See
.)