Nissan X-Trail e-POWER 2023 Owners Manual
6.10.1. Memory storage function
Two positions for the driver’s seat, front passenger's seat (where fitted) and outside mirrors (where fitted) can be stored in the automatic drive positioner switch. Follow these procedures to use the memory system.
Adjust the driver’s seat or the front passenger's seat (where fitted) and outside mirrors (where fitted) to the desired positions by manually operating each adjusting switch. For additional information, refer to
and .Push the SET switch and, within 5 seconds, push the automatic drive positioner switch (1 or 2).
The indicator light for the pushed automatic drive positioner switch will come on and stay on for approximately 5 seconds.
The chime will sound if the memory has been stored.
If a new memory position is stored in the same automatic drive positioner switch, the previous memory position will be overwritten by the new stored position.