Nissan X-Trail e-POWER 2023 Owners Manual
6.6.2. Operating power back door (where fitted)
To operate the power back door, the vehicle must be in the P (Park) position.
The power back door will not operate if the 12-volt battery voltage is low.
If the back door is open approximately 150 mm (5.9 in) or less from the fully closed position, power back door cannot be performed by any switch operations. To operate the power back door, manually close the back door.
The power back door operation can be activated or deactivated in the vehicle information display. (See
.)For models with motion-activated back door: When washing, waxing or maintaining your vehicle, placing or replacing the body cover, or splashing water to the area around the kick motion sensor, turn off the power back door.
If the power open or close operation is performed consecutively, the safety mode activates and the operation cannot be performed for a certain period of time. In this case, wait for a while and then perform the operation.