Nissan X-Trail e-POWER 2023 Owners Manual
8.18.1.4. Resuming a previous set speed
If a set speed limit has been cancelled, the set speed will be stored in the speed limiter memory.
This speed limit can be reactivated by pressing the <RES+> switch upwards ([Resumed] message appears on the display).
If the current vehicle speed is higher than the previous set speed, the accelerator pedal will not work and the set speed indicator will flash until the vehicle speed drops below the set speed limit.
When the actual vehicle speed exceeds the set speed, an audible warning will be heard a short time after the set speed is exceeded and driver intervention is not detected.
Owners Manual