Nissan X-Trail e-POWER 2023 Owners Manual
8.36.5. System maintenance
The parking sensors (A) (4 or 6, where fitted) and (B) (4 or 6) are located on the bumpers.
Always keep the area near the sensors clean.
If the sensors are dirty, wipe them off with a soft cloth while being careful to not damage them.
The sensors may be blocked by temporary ambient conditions such as splashing water, mist or fog. The blocked condition may also be caused by objects such as ice, frost or dirt obstructing the sensors. Check for and remove objects obstructing the area around the sensors.
Do not subject the area around the sensors to strong impact. Also, do not remove or disassemble the sensors. If the sensors and peripheral areas are deformed in an accident, etc., have the sensors checked. It is recommended that you visit a NISSAN dealer or qualified workshop for this service.
Do not attach stickers (including transparent material), install accessories or apply additional paint on the sensors and their surrounding areas. This may cause a malfunction or improper operation.
When washing the vehicle using a high-pressure washer, do not apply direct washer pressure on the sensors. This may cause a malfunction of the sensors.