Nissan X-Trail e-POWER 2023 Owners Manual
8.2.4.2. TPMS resetting
To keep the TPMS functioning properly, the reset operation must be performed in the following cases.
when the tyre pressure is adjusted
when a tyre or a wheel is replaced
when the tyres are rotated
Perform the following procedures to reset the TPMS.
Park the vehicle in a safe and level place.
Apply the parking brake and push the P position switch to shift to the P (Park) position.
Adjust the tyre pressure on all four tyres to the recommended COLD tyre pressure shown on the tyre placard. Use a tyre pressure gauge to check the tyre pressure.
Place the power switch in the ON position.
Press the
button (1) until [Settings] appears and then push the scroll dial (2).Use the scroll dial (2) until [Tyre Pressures] is selected, and press the scroll dial (2).
Use the scroll dial (2) until [Calibrate] is selected, and press the scroll dial (2).
Use the scroll dial (2) until [Yes] is selected, and press the scroll dial (2) to reset the TPMS.
After resetting the TPMS, drive the vehicle for several minutes at speeds above 25 km/h (16 MPH).
If the low tyre pressure warning light illuminates after the resetting operation, it may indicate that the TPMS is not functioning properly. Have the system checked by a NISSAN dealer or qualified workshop.
For information regarding the low tyre pressure warning light, see
.