Nissan X-Trail e-POWER 2023 Owners Manual
8.36.2. Turning on and off the parking sensor (sonar) function
- Steering-wheel-mounted control (left side)
- Vehicle information display
The system is automatically activated when the power switch is in the ON position and the shift lever is in the D (Drive) (models with front sensors) or R (Reverse) position.
When the shift lever is in the R (Reverse) position and the Parking Aids screen is displayed in the vehicle information display, the parking sensor (sonar) system can be disabled temporarily by pushing the scroll dial on the steering wheel.
Perform the following steps to set up the parking sensor (sonar) system function.
Push the
button until [Settings] appears in the vehicle information display and then push the scroll dial. Use the scroll dial to select [Driver Assistance]. Then push the scroll dial.Select [Parking Aids] and push the scroll dial.
Use the scroll dial to navigate in the menu and select or change an item:
[Moving Object] (where fitted)
— Turns ON/OFF the Moving Object Detection (MOD) (See
.)[Display]
— Shows the parking sensor display in the vehicle information display when the parking sensor (sonar) system activates
[Front] (where fitted)
— Turns ON/OFF the front sensors
[Rear]
— Turns ON/OFF the rear sensors
[Side] (where fitted)
— Turns ON/OFF the side sensors
[Distance]
— Changes the sensor’s detection distance to [Far], [Medium] or [Near]
[Volume]
— Changes the volume of the tone sound to [High], [Medium] or [Low]