Nissan X-Trail e-POWER 2023 Owners Manual
5.5.5.6. Tyre Pressures
The settings in the [Tyre Pressures] menu are all related to the Tyre Pressure Monitoring System (TPMS). (See
and .)[Target Front]
[Target Rear]
[Tyre Pressure Unit]
[Calibrate]
[Target Front]
The [Target Front] tyre pressure is the pressure specified for the front tyres on the tyre placard.
Use the scroll dial (1) to select and change the value for the “Target Front” tyre pressure.
[Target Rear]
The [Target Rear] tyre pressure is the pressure specified for the rear tyres on the tyre placard.
Use the scroll dial (1) to select and change the value for the [Target Rear] tyre pressure.
[Tyre Pressure Unit]
The unit for tyre pressure that is shown in the vehicle information display can be changed to:
[psi]
[bar]
[kPa]
[kgf/cm2]
Use the scroll dial (1) to select and change the unit.
If necessary, refer to the following table to convert between units.
Calibrate
The tyre pressure is affected by the temperature of the tyre; the tyre temperature increases when the car is driven. To be able to accurately monitor the tyre air leakage and to prevent false TPMS warnings due to changes in temperature, the TPMS system uses temperature sensors in the tyres to perform temperature compensation calculations.
On rare occasions it may be necessary to recalibrate the TPMS system reference temperature. This operation should only be performed when the actual tyre pressure has been adjusted, while the current ambient temperature is significantly different to the current calibration temperature. (See
.)Use the scroll dial (1) to start or cancel the calibration process. (See
.)