Nissan X-Trail e-POWER 2023 Owners Manual
5.5.5.8. Vehicle Settings
The vehicle settings allows user to change settings for the following menus.
[Power Back Door] (where fitted)
[Lighting]
[Turn indicator]
[Locking]
[Wipers]
[Alarm System] (where fitted)
[Driving Position] (where fitted)
[Rear Door Alert] (where fitted)
[Mirror Fold]
The vehicle settings can be changed using the scroll dial (1).
[Power Back Door] (where fitted)
This allows user to turn the power back door ON or OFF.
[Lighting]
The [Lighting] menu has the following options:
[Welcome Light]
The welcome lighting can be set to be ON or OFF. Use the scroll dial (1) to turn this feature ON or OFF.
[Auto Room Lamp]
The interior light can be set to be ON or OFF. Use the scroll dial (1) to turn this feature ON or OFF.
[Mood Lighting] (where fitted)
The brightness of the Mood Lighting can be adjusted. Use the scroll dial (1) to select the brightness.
[Turn indicator] (where fitted)
The "3 Flash On" overtaking feature can be set to be ON or OFF. From the [Turn indicator] menu, select [3 Flash On]. Use the scroll dial (1) to turn this feature ON or OFF.
The [Locking] menu has the following options:
[I-Key Door Lock] (where fitted)
When this item is turned on, the lock or capacitive unlock sensors (on the front door handles) and the request switch are activated. Use the scroll dial (1) to activate or deactivate this function.
[Selective Unlock]
When this item is turned on, only the corresponding door is unlocked when using the capacitive unlock sensor on the door handles or the request switch (where fitted). All the doors can be unlocked if the lock sensor is touched within 5 seconds after using the capacitive unlock sensor or the request switch is pushed again within 5 seconds after pushing the request switch. When this item is turned to off, all the doors will be unlocked when using the capacitive unlock sensor or the request switch once. Use the scroll dial (1) to activate or deactivate this function.
[Wipers]
The [Wipers] menu has the following options:
[Speed Dependent]
The “Speed Dependent” feature can be activated or deactivated. Use the scroll dial (1) to turn this feature ON or OFF.
[Auto Wipe]
The “Auto Wipe” feature can be activated or deactivated. Use the scroll dial (1) to turn this feature ON or OFF.
[Reverse Link]
The “Reverse Link” wiper feature can be set to be ON or OFF. Use the scroll dial (1) to turn this feature ON or OFF.
[Alarm System] (where fitted)
The [Alarm System] menu has the following options:
[Always ON]
When this item is selected, the ultrasonic sensor and tilt sensor (where fitted) will activate each time the alarm is set.
[Ask on Exit]
When this item is selected, the alarm system will provide the choice to disable the ultrasonic sensor and tilt sensor (where fitted) after the power switch is placed in the "OFF" position.
[Disable Once]
When this item is selected, the ultrasonic sensor and tilt sensor (where fitted) will be disabled until the next time the alarm system is disarmed.
[Driving Position] (where fitted)
[Exit Seat Slide]
Allows user to turn this feature ON or OFF. (See
.)
[Rear Door Alert] (where fitted)
Allows user to select an item below.
[Horn & Alert]
[Alert Only]
[OFF]
[Mirror Fold]
Allows user to select an item below.
[Auto Fold Off]
[Unfold at Power on]
[Unfold at Unlock]