Nissan ARIYA 2023 Owners Manual

9.16.4.3. Entering from the side

image

Illustration 7: The side indicator light illuminates if a vehicle enters the detection zone from either side.

image

The radar sensors may not detect a vehicle which is travelling at about the same speed as your vehicle when it enters the detection zone.

image

Illustration 8: If the driver activates the turn signal while another vehicle is in the detection zone, then the side indicator light and Intelligent Blind Spot Intervention indicator flash and a chime will sound twice.

image

If the driver activates the turn signal before a vehicle enters the detection zone, the side indicator light and Intelligent Blind Spot Intervention indicator will flash but no chime will sound when another vehicle is detected.

image

Illustration 9: If the Intelligent Blind Spot Intervention system is on and your vehicle approaches the lane marker while another vehicle is in the detection zone, the system chimes (three times) and the side indicator light and Intelligent Blind Spot Intervention indicator flash. The Intelligent Blind Spot Intervention system slightly applies the brakes on one side to help return the vehicle back to the centre of the driving lane.

image

Illustration 10: The Intelligent Blind Spot Intervention system will not operate if your vehicle is on a lane marker when another vehicle enters the detection zone. In this case only the BSW system operates.

image
  • The radar sensors may not detect a vehicle which is travelling at about the same speed as your vehicle when it enters the detection zone.

  • Intelligent Blind Spot Intervention will not operate or will stop operating and only a warning chime will sound under the following conditions.

    • When the brake pedal is depressed.

    • When the vehicle is accelerated during Intelligent Blind Spot Intervention system operation

    • When steering quickly

    • When the ICC, Intelligent Forward Collision Warning or Intelligent Emergency Braking warnings sound.

    • When the hazard warning flashers are operated.

    • When driving on a curve at a high speed.

    • When the BSW system is turned off.

Parent topic: