Nissan ARIYA 2023 Owners Manual
8.9.1.2. Manual operation
Fan speed control
Use the fan speed control buttons or keys to manually control the fan speed.
Air intake control
The air intake control mode will change each time the air intake control button or key is pushed or touched.
When the air recirculates inside the vehicle, the colour of the air intake control button and key are orange.
When the air flow is drawn from outside the vehicle, the colour of the air intake control button and key are white.
When the "
" icon is displayed in the climate control screen, the air intake will be controlled automatically.
Air flow control
Touching the air flow control key manually controls air flow and selects the air outlet:
| Air flows mainly from centre and side vents. |
| Air flows mainly from centre and side vents and foot outlets. |
| Air flows mainly from the foot outlet and partly from the defroster. |
| Air flows mainly from the defroster and foot outlets. |
—
—
—
—
On the climate control screen, the status of air flow for each position can be checked.
You can turn on and off air flow individually by touching the desired position.
The amount of wind can change by swiping the display.
When adjusting the temperature, the colour of display showing the amount of wind will change. These colours are not indicate the temperature of wind but the set temperature.
Ventilation
Touch the [FAN ONLY] key to turn on the ventilation mode. (The colour of the key will turn orange.)
The ventilation mode requires a lower power consumption, so driving range will increase.
In ventilation mode, temperature is not indicated on the climate control screen.
[DRIVER ZONE] mode
Touch the [DRIVER ZONE] key to turn on the [DRIVER ZONE] mode. (The colour of the key will turn orange.) The air flows mainly from the driver's side in the [DRIVER ZONE] mode.
The [DRIVER ZONE] mode requires a lower power consumption, so driving range will increase.
Synchronise temperature settings
Touch the [SYNC] key to turn on the [SYNC] mode. (The colour of the key will turn orange.)
When the [SYNC] mode is active, the driver’s side temperature control button or key will control the driver's and front passenger's side temperatures.
To exit the [SYNC] mode, change the passenger's side temperature on the front passenger's side. (The colour of the [SYNC] key will turn white.)