Cruise Cruise control operations (manual transmission vehicles)

Push the Drive Assist switch (3) shortly to choose the vehicle-to-vehicle distance control cruise control mode.

Push and hold the Drive Assist switch (3) to choose the conventional (fixed speed) cruise control mode. Steering Assist is not available with conventional (fixed speed) cruise control.

Once a control mode is activated, it cannot be changed to the other cruise control mode. To change the mode, push the Drive Assist switch (3) once to turn the system OFF. Then push the Drive Assist switch (3) again to turn the system back on and select the desired cruise control mode.

Always confirm the setting of the ICC system in the Vehicle Information Display (1).

Turning the ICC system on will turn on the Intelligent Lane Intervention (ILI) system and Intelligent Blind Spot Intervention system at the same time, providing those systems are enabled in the [Driver Assistance] menu in the vehicle information display. For additional information, refer to