Nissan Juke 2022-present Owners Manual
Manual Manual operation
The manual mode can be used to control the heater and air conditioner to your desired settings.
Turning off the heater and air conditioner
(Models without Thermaclear heated windscreen) To turn off the heater and air conditioner, push the <ON OFF> button.
(Models with Thermaclear heated windscreen) The Thermaclear Heated windscreen button (where fitted) replaces the regular <ON OFF> button for the heater and air conditioning. To turn off the system turn the Fan speed control dial to the lowest speed position, wait for approximately 1 second and turn the dial further towards the OFF position.
Fan speed control
Turn the fan speed control dial. Turn the dial clockwise to increase the fan speed. Turn the dial counter clockwise to decrease the fan speed.
Push the <AUTO> button to change the fan speed to the automatic mode.
Air flow control
Push the Air flow control button to change the air flow mode.
| Air flows from the centre and side vents. |
| Air flows from the centre and side vents and foot outlets. |
| Air flows mainly from the foot outlets |
| Air flows from the defogger outlets and foot outlets. |
| Air flows mainly from the defogger outlets |
Temperature control
Turn the temperature control dial to set the desired temperature. Turn the dial clockwise to increase the temperature. Turn the dial counter clockwise to decrease the temperature.
Air recirculation
Push the air recirculation 
button to circulate the air flow inside the vehicle. (The ${1} indicator light will illuminate.)
Push the air recirculation button again to draw the air flow from outside the vehicle. (The ${1} indicator light goes off.)
Automatic air intake control (where fitted)
If the indicator light on the air recirculation button is illuminated, push and hold the button with the light illuminated (the indicator light will blink twice). The automatic air intake control mode is set.