Nissan Juke 2024 Owners Manual

6.5.3.3. Automatic operation (AUTO)

The AUTO mode may be used year-round as the system automatically controls constant temperature, air flow distribution and fan speed after the desired temperature is set manually.

Turning off the heater and air conditioner

(Models without Thermaclear heated windscreen) To turn off the heater and air conditioner, push the <ON OFF> button.

(Models with Thermaclear heated windscreen) The Thermaclear Heated windscreen button (where fitted) replaces the regular <ON OFF> button for the heater and air conditioning. To turn off the system turn the Fan speed control dial to the lowest speed position, wait for approximately 1 second and turn the dial further towards the OFF position.

Cooling and dehumidified heating

  1. Push the <AUTO> button.

  2. If the A/C indicator light does not illuminate, push the <A/C> button. (The A/C indicator light will illuminate.)

  3. Turn the temperature control dial to set the desired temperature.

  4. If the indicator light on the air recirculation image button is illuminated, push the button with the light illuminated to switch the air recirculation mode OFF.

A visible mist may be seen coming from the vents in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.

Heating (A/C off)

  1. Push the <AUTO> button.

  2. If the A/C indicator light illuminates, push the <A/C> button. (The A/C indicator light will turn off.)

  3. Turn the temperature control dial to set the desired temperature.

  • Do not set the temperature lower than the outside air temperature. Doing so may cause the temperature to not be controlled properly.

  • If the windows fog up, use dehumidified heating instead of the A/C off heating.

Dehumidified defrosting/defogging

  1. Push the front defogger image button. (The ${1} indicator light will illuminate.)

  2. Turn the temperature control dial to set the desired temperature.

  • To remove frost from the outside surface of the windscreen quickly, set the temperature to a high temperature and the fan speed to the maximum level.

  • After the windscreen is cleared, push the front defogger image button again. (The indicator light will turn off.)

  • When the front defogger image button is pushed, the air conditioner will automatically turn on when the outside air temperature is above −2°C (28°F) to defog the windscreen. The air recirculation mode will automatically turn off. The outside air circulation mode will be selected to improve the defogging performance.

Parent topic: