Nissan Juke Hybrid 2024 Owners Manual

8.17.7.6. Steering Assist Activation/Deactivation

Use the following methods to enable or disable the Steering Assist.

ProPILOT Assist switch on steering wheel

Press the ProPILOT Assist switch. This will turn ICC on in standby mode. Note that Steering Assist may already be switched on, depending on the settings in the [Settings] menu. These settings are retained if the hybrid system is restarted.

Then press on the right-hand steering wheel switch to set cruise control speed. When the system detects clear lane markings the Steering Assist icons will turn green and the Steering Assist system will become active.

The Steering Assist icon will remain grey if the vehicle is driven at speeds under 60 km/h (37 MPH) and no vehicle ahead is detected

Steering Assist switch

To turn the Steering Assist ON or OFF, push the Steering Assist switch on the instrument panel.

image
  • When the Steering Assist switch is used to turn the system ON or OFF, the system remembers the setting when the hybrid system is restarted. The switch must be pushed again to change the setting to ON or OFF.

  • The Steering Assist switch changes the status of the [Steering Assist] selection made in the [Settings] screen in the Vehicle Information Display.

Setting in the Vehicle Information Display

  1. Press the image or image buttons on the left hand side of the steering wheel until the [Settings] menu is displayed in the Vehicle Information Display and press the button.

  2. Use the image and image buttons on the steering wheel to highlight [Driver Assistance] and press the button.

  3. With [Steering Assist] highlighted press the button to toggle the Steering Assist system status.

    An indicator indicates that Steering Assist is selected.

image
  • When the Steering Assist screen is displayed on the Vehicle Information Display, press the button on the steering wheel to show the [Driver Assistance] setting menu.

  • When enabling/disabling the system through the Vehicle Information Display or when pressing the Steering Assist switch, the system retains the current setting even if the hybrid system is restarted.

Parent topic:
Owners Manual