Nissan Qashqai 2024 Owners Manual
5.10.1.1. Activation of the Automatic brake hold function
With the ignition switch in the ON position, push the Automatic brake hold switch (1). The indicator light on the Automatic brake hold switch illuminates.
When the Automatic brake hold function goes into standby, the Automatic brake hold indicator light (white) illuminates.
To use the Automatic brake hold function, the following conditions need to be met:
The driver's seat belt is fastened.
The Electric Parking Brake is released.
The vehicle is not in the P (Park) position. (Xtronic transmission models).
The vehicle is not stopped on a steep hill.
The Automatic brake hold function retains the last state until the driver changes the option even if the ignition switch is turned off.
Owners Manual