Nissan X-Trail e-POWER 2023 Owners Manual
7.12.3.1. Pairing device
Enter the phone setup menu via the 
button on the instrument panel, select the [Bluetooth] key, and then check if the Bluetooth® is set to on. (Use the OK/MENU dial to turn it on.)
To setup the Bluetooth® system to pair (connect or register) your preferred mobile phone, follow the following procedure.
To pair a device, use the [Scan devices] key or the [Pair device] key on the display. See
.A notification message will be displayed when the phone is successfully paired.
The display will return to the current audio source status after the connection is complete.
While the Bluetooth® connection is active, the following icons will appear on the display.
: Signal strength indicator
: Battery status indicator*
: Bluetooth® connection ON indicator
*: If low battery is indicated, the Bluetooth® device must be recharged soon.
Up to 5 different Bluetooth® devices can be connected. However, only one device can be used at a time. If 5 different Bluetooth® registered devices are registered, a new device can only replace one of the 5 existing paired devices.
The pairing procedure and operation may vary according to device type and compatibility. See the Bluetooth® device Owner’s Manual for further details.